Options Tips for The Average Joe

      Comments Off on Options Tips for The Average Joe

Steps on How to Refill Ink in a Toner Printing has gone a step further with the advancement in technology. This is due to the introduction of laser printer toner. If your printing starts to fail, it means that your toner is out so you should refill it. Some people always tend to think that their cartridge is worn out but it is their toner that is out. The cartridge is always made in such a way that it will take some years before it wears out. If you want your cartridge to last longer, the secret is always to know the right time when you are supposed to add the toner. This will help to extend its life. The reason for this is because each and cartridge is made to work with a specific weight, gain size and chemical type toner. These are the specific details that make it work with only that cartridge that cannot work with any other cartridge. Knowing how to add the toner is another thing you have to know. This is why you need to know the steps on how to refill the toner. They are the following. With your toner at hand, you will first of all need to locate or make the fill hole. Each and every cartridge has got a holding tank which holds the toner powder. Some of them have got refill holes but others do not. There are also instruction guides on the refill kit on how you can do it. If there is no hole on your cartridge, then you will have to create one. Do not just do it anywhere because you might end up destroying it. With the hole you are supposed to create it on either ends of the cartridge and not in the middle, mostly the side that faces up. The toner comes with the specific cartridge that it can work with. This is where the second step will be required. You will now need to pour the toner. Make sure that it is the correct one and also read the instructions too before pouring it. Counter check and see if the toner is still good or if it has expired. The toner kit also has got a funnel that you fit in the toner cup so that you do not spill the toner.
Looking On The Bright Side of Services
The last and third step is to release the fill hole. You have to return the cup that covers the hole if your cartridge has a hole. Cartridge refill kits where you have burn a fill hole comes with a specific aluminum plate for that particular job. You will use the tape to cover the hole. You will now shake the cartridge gently so that it evenly distribute toner. You can now reinsert it to your printer and continue printing.Practical and Helpful Tips: Printing